Copyright © 2021 Seamless Steel Pipe,Tubing and Casing, API 5L line pipe-Bestar Steel Co., Ltd.All rights reserved.
Already know what you need?
Request a quote
Search results may not reflect all products and sizes. Contact a sales repfor the most accurate information.Get a quote now
Match your project requirements with our inventory. View our product catalog.Download
Product & service resources
Find more information on our products and services and view our conversion charts and calculators.Show me more
FBE (Fusion Bond Epoxy) Coated Pipe
Used for natural gas, petroleum, water & sewage, and pipe systems
Plain End/Bevelled End, Burr Removed
FBE coating steel pipe is fusion bonded epoxy coating steel pipe.It is a kind of external heat resin used for pipes.With a form of dry powder at thickness 400-600 microns on to the heated surface of pipe.Once the FBE coated on the pipe surface,the FBE film provides an extremely hard surface with great adhesion to the surface of pipe.The FBE layer in a even form and have good resistance to the chemical reaction.
Fusion bonded epoxy (FBE) coating are used to prevent corrosion and harmful chemicals of steel pipes.This is a thin coating made of epoxy-resin powder material in a thin film and applied to pipes by a special coating device for electrostatic spraying.These FBE coated pipes can be used in temperatures up to 85oC in dry conditions.
The steel pipes are treated by shot blasting and intermediate frequency preheating before painting, and then the epoxy powder coating is sprayed on the surface of the heated pipe products by electrostatic spraying method, which is fused and bonded on the surface of the steel pipe and solidified to form a coating. FBE coating is usually one – step film – forming structure.
Features of fusion bonded epoxy(FBE) coating steel pipes:
FBE coating is corrosion resistant and chemical resistant
FBE coating has strong adhesion to steel, film integrity, soil stress and wear resistance.
FBE coating increases the life span of steel pipes.
The FBE coating can be used for external corrosion protection of buried or underwater steel piping installations with operating temperatures of -30~100 °c.
On the other hand,the defect of the FBE steel pipe is it have poor resistance to mechanical damage and heat and humidity.
A three-layer extruded polyethylene coating (3LPE) is composed of extruded, three-layer, anti-corrosive steel pipe coatings.
3 LPE COATING ACC. TO DIN 30670
Layer 1: This is a layer is of fusion bonded epoxy used for good corrosion protection.
Layer 2: Second layer is the copolymer adhesive and has good chemical bonding with both layesr of fusion bonded epoxy (FBE) and the top layer polyethylene.
Layer 3: This top layer is consists of polyethylene to bond well with each other
Third layer of polyethylene coated pipes are the preferred choice for transmission of oil and gas around the world. It can withstand varying temperatures and environments ranging from desert drylands to deep underwater regions. 3LPE coated steel pipes are used for transportation of oil and gas, drinking water and other fluids. 3LPE coated pipes can be used in the high temperatures as high as 60 to 80°c.
What is DIN 30670 Standard?
The present standard specifies requirements for coatings that are applied to longitudinally or spirally welded or seamless steel pipes and fittings used for the construction of pipelines for conveying liquids or gases.
Applying this standard ensures that the PE coating provides sufficient protection against the mechanical, thermal and chemical loads occurring during operation, transport, storage and installation.
THICKNESS OF 3LPE COATING ON STEEL PIPES
minimum 125 µm Epoxy layer thickness
minimum 150 µm copolymer layer thickness
minimum thickness of 1.8 mm to 4.7 mm polyethylene or polypropylene layer
Minimum total layer thickness range
Layer thickness in mm
M ≤ 15
15 < M ≤ 50
50 < M ≤ 130
130 < M ≤ 300
300 < M
Please note: The total required thickness may be reduced for SAW pipes by a maximum of 10% on joint seam.
Minimum thickness of finished coating
Pipe Sizes (Specified OD)
Minimum Coating Thickness Chart (mm)
≤ 10 3 /4” (273.1 mm)
> 12 3 /4” ( 323.9 mm) to ≤ 18” (457 mm)
> 20" (508.0 mm) to ≤ 30" (762 mm)
> 32" (813.0 mm)
THICKNESS OF FBE COATING ON STEEL PIPES
Epoxy Powder (μm)
Adhesive Layer (μm)
Min. Thickness on The Coating (mm)
Common Level (G)
Strengthen Level (S)
DN ≤ 100
100 < DN ≤250
250 < DN < 500
500 ≤DN < 800
DN ≥ 800
DIN 30670-2012 Polyethylene Coatings on Steel Pipes and Fittings
ISO 21809-1:2011 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
CAN CSA Z245.21 External Polyethylene Coating for Pipe
NFA 49-710 External Three-Layer Polyethylene Based Coating, Application by Extrusion
SHELL DEP 220.127.116.11-CSPC External Polyethylene and Polypropylene Coating for Line Pipe
Process Flowchart of 3LPE Coating
Process Flowchart of FBE Coating